FIBERGLASS REPLACEMENT BEDS

for 1979-1983 and 1984-1988 LONG or SHORT bed Toyota trucks

 1989-1995 short bed , and a /84-/88 CUSTOM bed

    We here at toyotafiberglass.com offer premium fiberglass replacement beds for /79-/83 and /84-/88 long and short bed ,  /89-95 short bed Toyota trucks and now our newest production custom . These hand constructed , hand laid , not chopped  , beds are made of 5/8" fir plywood (floor and front wall ) , very acceptable to fiberglass resin and completely sealed rendering the wood to a waterproof state , With 2x4 and 2x6 reinforcements , which double for the mounting points , The sides (2 layers of 1 1/2 oz mat and 1 layer of woven roving ) are attached and then the floor is then sandwiched between  fiberglass cloth (1 1/2-2 oz mat)  for structural strength and weather proofing , and are very strong and durable . The use of the wood also offers weight . We tried other core materials , but found them to be to light and would  disturb the trucks center of balance . When our bed is installed your truck will enjoy the same ride height as before with no more , no less stress on shocks and springs as weight is virtually the same as factory . We also manufacture our parts using special ISO resin , which is particularly resistant to the shrinkage known to affect fiberglass pieces .

    Our replacement beds  also allow for the use of the stock tail gate or our fiberglass tail gate , tail lights , marker lights , fender flares , license plate lamps  and fuel filler lid .

with over 200 beds built  , and as many satisfied customers  , our quality product is unmatched in today's market  .

some waviness on the fiberglass sides is inevitable , Factory spot welds and imperfections are present , especially in our stock 79-83 and  84-88 beds . for a show quality finish , blocking will be required . 99% of our customers install as is .

    Beds are of the Canadian/Japanese style and are NOT the fleet side or USA style (/84-/88) The USA beds have a different looking tail gate , and may not look correct . We recommend our fiberglass tail gate for our USA customers on the /84-/88 models to match .

**please note if used on 2wd's , the wheel wells on our beds will be larger ,  as they are of the 4wd design .

    Hold down hooks are the only feature you will notice are not there . /79-/83 model